Mainsflow Electric

NEW MAINSFLOW ELECTRIC CONTRACTOR

A NEW ALL-ELECTRIC MAINS PRESSURE HOT WATER SYSTEM
WITH ALL THE BENEFITS OF THERMAL STORE

	HIGH FLOW RATES 20 LITRES PER MINUTE

	STANDARD OVERFLOW ARRANGEMENT

	3 MODELS AVAILABLE

	UTILISES OFF-PEAK TARIFFS

	INHIBITOR SUPPLIED

	5 YEAR GUARANTEE*

*5 year guarantee on shell, 2 year on components.

SIMPLE TO INSTALL

The MainsflowElectric is specifically designed to provide mains fed hot water in properties where a boiler is not available.

Operating from electrical input only, these clean and quiet units are easy to install, overcoming difficulties associated with unvented units, particularly in flats and apartments, a 22mm solvent weld plastic overflow is all that is required.

GREAT PERFORMANCE

Mainsflow Electric Contractors are fitted with two 3kw immersion heaters to utilise off peak tariffs and to provide a top up boost at day rate tariff to provide a further 35 litres of useable water if required during peak periods.
Higher rated immersion heaters are available on request.

Select the product you require and click to view - or click below to access the following information

SYSTEM DESIGN

Each unit is a self contained open vented store with header tank.
It can be sited anywhere in the property. Contractor controls include a pre-plumbed package with isolation valve, flow controller, expansion vessel, blending valve and ball valve with copper float.
A pressure reducing valve is supplied loose. Special inhibitor is provided for the store.

MAINSFLOW ELECTRIC SIZING & APPLICATION
CAPACITY	TYPICAL APPLICATION
160 Lites 210 Litres 250 Litres	Single bath / shower over bath 1 bed 2 persons Single bath plus 1 shower 2 bed 3 persons Single bath plus 1 shower 3 bed 4 persons

Note: Normal bathing temperatures are 40°C and a standard bath is designed as 100 litres at 40°C in BS6700.

STORE CAPACITY	LITRES AVAILABLE AT THE HOT TAP
STORE CAPACITY	@50°C	@45°C	@40°C
160 Lites 210 Litres 250 Litres	100 125 150	120 155 190	150 190 230

Based on tests carried out at Albion February/March 2005.
Incoming cold mains not exceding 10°C
Ambient temperature not exceding 20°C
Store temperature charged to 80°C
Flow rate at outlet 20 lpm

SIZES
CAPACITY	CODE	DIMENSIONS
160 Litres 210 Litres 250 Litres	MFCE160CON MFCE210CON MFCE250CON	1400 x 550 1700 x 550 1995 x 550

Sizes include foam

Utilisation of off peak tariffs is recommended to charge the store to 80°C and to run it during the day. A top-up (boost) can be used to give a further 35 litres of hot water if required during peak periods.